Disclaimer

General Disclaimer

The information and tools provided by MechKit (“https://www.mechkit.com”) are for general educational and reference purposes only. Everything here is offered in good faith, but we make no representation or warranty of any kind, express or implied, as to the accuracy, adequacy, validity, reliability, or completeness of any information or result on the site.

Any use of the information or tools is entirely at your own risk. It is your responsibility to ensure the results meet your specific requirements and to verify them before acting on them.

An Engineering Aid, Not Certified Design

MechKit’s calculators — the bolt torque calculator, the gear ratio and output speed calculator, the belt and pulley calculator, the material weight calculator, the hydraulic cylinder force calculator, and the thread and fastener size reference — are designed to help you plan, estimate, and check your working. They do not constitute professional engineering advice, a design calculation, or a certification of fitness for any purpose. For any application where failure could cause injury, damage, or loss — a structural or load-bearing joint, a lifting or hoisting rig, a pressure system, or rotating machinery — confirm every figure against the component manufacturer’s specification and, where appropriate, a qualified professional engineer.

Results Are Simplified Estimates

The tools apply standard, idealised formulas and round their output for readability. Real joints and machines involve friction scatter, material variation, safety factors, dynamic and shock loads, wear, temperature, and assembly effects that a simple model does not capture. A torque-to-preload figure in particular is an estimate with wide scatter; treat every result as a starting point, not a guaranteed value.

Why a Result May Look Off

A calculator can return a surprising or blank answer when:

• Units are mismatched: entering pressure in psi where bar is expected, or a length in centimetres where millimetres are expected, changes the answer entirely.
• Inputs describe an impossible part: for example, a rod diameter equal to or larger than the cylinder bore, or a negative dimension.
• The wrong grade or pitch is selected:a fastener’s property class and thread pitch strongly affect the clamp load and torque a calculator returns.
• Losses are ignored: gear, belt, and hydraulic outputs are shown before friction and efficiency losses, which reduce the real-world figure.

No Warranty

MechKit expressly disclaims all warranties, whether express, implied, statutory, or otherwise, including implied warranties of merchantability, fitness for a particular purpose, and non-infringement. We do not warrant that our tools, calculations, or information are error-free or complete, or that the website will be available without interruption.

Limitation of Liability

To the maximum extent permitted by law, MechKit shall not be liable for any direct, indirect, incidental, special, consequential, or exemplary damages — including equipment damage, project errors, injury, or other losses — arising out of or related to your use of our tools and services.

External Links & Advertising

The site may link to third-party websites and displays advertisements from networks including Google AdSense. We do not investigate, monitor, or endorse third-party content, and the presence of a link or ad is not an endorsement of any product or service.

Changes to This Disclaimer

We may modify this disclaimer at any time. Changes are posted here with an updated revision date, and your continued use of the site indicates acceptance of the changes.

Contact Us

If you have questions about this Disclaimer, please visit our Contact page or email us at support@mechkit.com.